Compliance Assurance Monitoring
Compliance assurance monitoring (CAM) is intended to provide a reasonable assurance of compliance with applicable requirements under the Clean Air Act (CAA) for large emission units that rely on pollution control device equipment to achieve compliance. Monitoring is conducted to determine that control measures, once installed or otherwise employed, are properly operated and maintained so that they continue to achieve a level of control that complies with applicable requirements. The CAM approach establishes monitoring for the purpose of: (1) documenting continued operation of the control measures within ranges of specified indicators of performance (such as emissions, control device parameters, and process parameters) that are designed to provide a reasonable assurance of compliance with applicable requirements; (2) indicating any excursions from these ranges; and (3) responding to the data so that the cause or causes of the excursions are corrected.
Rule History
02/24/1997 - Final Rule
10/22/1997 - Final Rule Revisions
CAM Technical Guidance Document
A Technical Guidance Document (TGD) to aid in implementation of the rule has been prepared by EPA. The document further explains the CAM process, monitoring approach submittals, CAM illustrations, and supplies technical references for monitoring equipment and instruments.
The CAM TGD also contains two appendices. Appendix A contains detailed examples of CAM submittals for different combinations of pollutant specific emission units (PSEU), and add-on control devices. These submittals are based on actual case studies. Appendix B contains brief discussions by control device type of key operating parameters and indicators of performance with brief illustrations of general monitoring approaches for each of the types of control devices.
- Compliance Assurance Monitoring Technical Guidance Document, August 1998
- Compliance Assurance Monitoring Technical Guidance Document Appendices by Control Technique
- Compliance Assurance Monitoring Technical Guidance Document Appendices by Pollutant
Additional Resources
Response to Comments Part 1(479 pp, 1MB)
Response to Comments Part 2(85 pp, 184 K)
Response to Comments Part 3(391 pp, 860 K)
Press Release Fact Sheet(6 pp, 29 K)