Search Frequent Questions

Filter By:

Active filters:

Remove all filters

Displaying 1 - 15 of 21 results

  • How Can I Reduce the Time Needed to Run the Nonroad Emission Factor Post-Processing Scripts?

    See More Frequent Questions about MOVES and Related Models . Very long run times are not unusual for Nonroad emission factor post-processing scripts, particularly with a large output database. To reduce script run time, we recommend doing the following: Reduce the size of your output database by choosing just the…

    • Last published:

  • How do I contact EPA about lead concerns in my area?

    Answer: You may call the National Lead Information Center at 1-800-424-LEAD(5323) or visit our Contact Us about Lead page . You can also report violations online . Question Number: 23002-33312 Find a printable PDF copy of all frequent questions pertaining to lead .

    • Last published:

  • Will boiling my water help?

    No. Boiling water will NOT reduce nitrate levels. In fact, it will make the level of nitrate worse because some of the water will evaporate but the nitrate will not. This increases the concentration of nitrate in water.

    • Last published:

  • How Do I get Carbon Dioxide Equivalent (CO2e) Results for Nonroad Equipment?

    See More Frequent Questions about MOVES and Related Models . CO2e is simply the combination of the pollutants that contribute to climate change adjusted using their global warming potential. This can be done manually summing the mass of the pollutants multiplied by their global warming potential factors. These are the…

    • Last published:

  • How Do I Get Emission Factors or Inventory Totals for Nonroad Equipment Aggregated by the Various Categories used by MOVES?

    See More Frequent Questions about MOVES and Related Models . We have included a set of post-processing scripts that take the results of a Nonroad run and generate other output options. These scripts are all available in the MOVES graphical user interface in the Post Processing pull-down menu under “Run…

    • Last published:

  • Is it safe to shower or bathe in water if it is over the nitrate MCL of 10 mg/L?

    Nitrate is only a concern for ingestion (eating and drinking). It is not absorbed through your skin. People who install filter systems for nitrate often install them just for their kitchen sink faucet, and they use that faucet for their cooking and drinking water.

    • Last published:

  • What is EPA doing?

    EPA is working with its governmental partners and other stakeholders to investigate and address the issue. Most recently, EPA issued a letter to the state of Minnesota requesting a plan of action to address nitrate contamination in drinking water.

    • Last published:

  • What should I do if my water has elevated nitrates and/or exceeds the MCL?

    If nitrate exceeds the MCL of 10 mg/L, you should find a safe alternative drinking water supply. The quickest thing to do is to begin using bottled water for drinking. Another option is to install a treatment that will remove nitrate from your water such as reverse osmosis or a…

    • Last published:

  • Why is nitrate contamination a concern?

    Nitrate is an acute contaminant, meaning that health effects can occur immediately (I.e. within hours or days) of short-term exposure. Too much nitrate in your body makes it harder for red blood cells to carry oxygen. While most people recover quickly, this can be very dangerous for infants and some…

    • Last published:

  • What can I do to protect my family from lead contamination that was found in my neighborhood?

    If environmental exposure to lead is suspected, you should contact your local or state environmental office to determine if there are known or suspected sources of lead in the area. If there are known or suspected sources of lead, the Centers for Disease Control and Prevention (CDC) offers the following…

    • Last published:

  • How Can I Incorporate Local Data Into My MOVES-Nonroad Run?

    See More Frequent Questions about MOVES and Related Models . We recommend not modifying the internal tables of the MOVES-Nonroad model to incorporate local data, as this can lead to unintended consequences. Instead, you can apply local activity and population data by: Executing a nonroad run in Inventory mode for…

    • Last published:

  • How do I have my drinking water tested in the future?

    Minnesota Department of Health (MDH) recommends you use an accredited laboratory to test your water. Contact an accredited laboratory to get sample containers and instructions or ask your county environmental or public health services if they provide well testing services. Accredited Labs in Minnesota Accepting Drinking Water Samples from Private…

    • Last published:

  • Can N2O (nitrous oxide) Emissions be Estimated in the MOVES Nonroad Model?

    See More Frequent Questions about MOVES and Related Models . Nitrous oxide (N2O) results is not an option you can select for nonroad equipment in MOVES.

    • Last published:

  • How are people potentially exposed to nitrate?

    For many situations, the potential for children’s exposure from drinking water is medium to low. The potential can be higher when private wells become contaminated with nitrates from feed lot and agricultural runoff, and contaminated groundwater. Some geographic areas are at higher risk of drinking water contamination of private wells…

    • Last published:

  • I use a carbon filter. Will this help?

    Activated carbon filters, such as those in a “Brita” water pitcher, DO NOT remove nitrates.

    • Last published: