Search Frequent Questions
Filter By:
- Air Emissions Inventories Total results: 34
- Asbestos Total results: 141
- Butte Area/Silver Bow Creek Total results: 17
- Coronavirus (COVID-19) Total results: 33
- East Palestine, Ohio Train Derailment Total results: 148
- Emergency Planning and Community Right-to-Know Total results: 301
-
Fuel Program
Total results: 693
- Gasoline Sulfur Program Total results: 17
- Diesel Sulfur Program Total results: 7
- E15 comments Total results: 1
- Fuels and Fuel Additives (FFARs) Total results: 2
- Other Total results: 6
- Reformulated Gasoline and Anti-Dumping Total results: 431
- Registration Total results: 9
- Registration and Reporting under 40 CFR 79 Total results: 19
- Renewable Fuel Standard (RFS1) Total results: 67
- Renewable Fuel Standard (RFS2) Total results: 111
- Reporting Total results: 22
- Great Lakes Funding Total results: 92
-
Lead
Total results: 398
- Applying for Certification or Accreditation Total results: 22
- EPA/HUD Real Estate Notification & Disclosure Rule Total results: 24
- General Information About Lead Total results: 9
- Lead-Based Paint Program Fees Total results: 9
- Lead Abatement, Risk Assessment and Inspection Total results: 49
- Lead at Superfund Sites Total results: 3
- Lead in Drinking Water Total results: 25
- Lead in Products Total results: 1
-
Lead Renovation, Repair and Painting
Total results: 237
- Information for Do-It-Yourselfers Total results: 1
- Recordkeeping and Reporting Requirements Total results: 6
- Authorized State and Tribal Programs Total results: 3
- Enforcement and Inspections Total results: 5
- Firm Certification Total results: 26
- General Information about the Lead Renovation, Repair, and Painting (RRP) Rule Total results: 18
- Lead-Safe Certified Firm Logo Total results: 8
- Pre-Renovation Education Total results: 26
- Renovations Covered by the RRP Rule Total results: 84
- Renovator Certification and Training Total results: 12
- Training Provider Accreditation Total results: 7
- Work Practice Standards Total results: 41
- Testing for Lead Total results: 19
- MOVES Total results: 57
- Norwood Landfill Site Total results: 30
- Oil Regulations Total results: 96
- Permitting Under the Clean Air Act Total results: 19
- Radiation Total results: 1
- Risk Management Program (RMP) Total results: 285
- Southeast Minnesota Groundwater Total results: 11
Active filters:
Remove all filtersDisplaying 1 - 15 of 24 results
-
What is the Tier 2 Vehicle & Gasoline Sulfur Program?
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The Tier 2 Vehicle and Gasoline Sulfur Program is a landmark program, begun in January 2004, that affects every new passenger vehicle and every gallon of gasoline sold in the U.S. By designing cleaner cars that run on…
- Last published:
-
If a certified renovator is an employee of the certified firm, can the firm maintain all required records (those required of the firm and of the certified renovator); understanding that the certified renovator must also keep a copy of his certification as well as employee training records/documentation on the jobsite?
Answer: The renovation firm is the entity responsible for retaining and making available to EPA all records necessary to demonstrate compliance with the RRP Rule for a period of three years following completion of the renovation. The certified renovator is responsible for preparing the records demonstrating that the renovation was…
- Last published:
-
Can a refiner or importer use gasoline sulfur test methods other than ASTM D 2622-98, especially for sulfur levels of 10 ppm and less?
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The rule designates ASTM D 2622 as the benchmark test method by which compliance will be determined, and that is the test that the Agency typically will use in establishing compliance. However, the rule does permit alternative test…
- Last published:
-
There is significant difference between "refiner" and "refinery". Portions of the regulations use "refiner" where "refinery" is the appropriate term. While it may be clear from the context that "refinery" is meant, text should be changed to avoid any poss
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . We agree with the comment and intend to make these clarifications in a future rulemaking. These clarifications would not affect the regulatory requirements in the current final rule.
- Last published:
-
Under the RRP Rule, can the required records and documentation be stored electronically rather than as paper copies?
Answer: Yes. The renovation firm is responsible for retaining and making available to EPA all records necessary to demonstrate compliance with the Lead Renovation, Repair, and Painting (RRP) Rule for a period of three years following completion of the renovation. The RRP Rule does not specify the format in which…
- Last published:
-
Must a refinery that produces both California gasoline and federal RFG designate each batch produced as either federal RFG or California gasoline, and maintain segregation of both products, even though the gasoline meets the requirements of both programs?
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . Section 80.375(c) requires that each batch of California gasoline be designated as such by the refiner or importer, and that California gasoline be segregated from gasoline that is not California gasoline at all points in the distribution system…
- Last published:
-
Truckers may obtain both premium gasoline and regular gasoline from a terminal in order to supply a retail outlet with midgrade gasoline. In such cases, if a truck obtains a load of gasoline from a terminal that consists of a mixture of gasoline from a te
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The regulation specifically exempts gasoline in trucks from the testing requirement for S-RGAS, and instead allows truckers to rely on the test result of the terminal supplying the truck carrier. See § 80.210(d)(4). Where a tanker truck receives…
- Last published:
-
Section 80.46(a) was amended by the rule to require the use of ASTM D-3246 to determine the sulfur content of butane. Many refiners and butane suppliers do not currently use that method. Requiring a new method prior to the 2004 effective date of the gasol
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The final gasoline sulfur rulemaking amended 40 CFR § 80.46(a) to require the use of ASTM D 3246-96 to determine the sulfur content of butane. We did not intend to require the use of this new test method…
- Last published:
-
Can butane blenders generate allotments and credits?
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . Section 80.340(b)(1) provides that butane blenders may comply with the gasoline sulfur rule sampling and testing requirements using test results from the butane supplier provided that certain requirements are met. One requirement is that the sulfur content of…
- Last published:
-
Does the gasoline sulfur rule require refiners and downstream parties to account for the sulfur content of a registered fuel additive, such as a corrosion inhibitor used to help prevent sulfur-related fuel gauge sending unit failures?
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . Currently, there is no requirement under the gasoline sulfur rule for refiners or downstream parties to demonstrate compliance with the gasoline sulfur standards for registered fuel additives. Parties who add fuel additives, however, are responsible for ensuring that…
- Last published:
-
Section 80.335(a)(2) requires refiners to retain sample portions for the most recent 20 samples collected, or for each sample collected during the most recent 21 day period, whichever is greater. Is a refinery that produces only one or two batches of gaso
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The cited section of the regulation specifies the minimum number of batch samples from a refinery, which once created, must be maintained (twenty). The regulation does not specifically address the maximum amount of time that any particular sample…
- Last published:
-
A refiner produces a batch of gasoline at its refinery. It collects a sample of the gasoline and conducts certification testing. The sulfur content test result is less than the 80 ppm refinery level standard. The gasoline is then moved to another tank wit
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The downstream standard applies to samples of gasoline subsequent to movement of the gasoline from the tank in which certification sampling is conducted, even when these subsequent samples are collected within the refinery or import facility where the…
- Last published:
-
Under the RRP Rule, can the certified renovator comply with the rules by keeping records regarding his certification and employee training electronically, provided he can display them on a hand held device or laptop on the job site?
Yes. The Lead Renovation, Repair, and Painting (RRP) Rule does not specify the format in which these documents must be kept, but they must be available at the work site. Documents are not available if they cannot be viewed. Certified renovators must have with them at the work site copies…
- Last published:
-
Why are credits and allotments expressed in ppm-gallons and not in ppmbarrels, since barrels or thousand barrels are the commercial units used by refiners?
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . Consistent with the requirements under the RFG program, § 80.195(a)(2) provides that, for purposes of sulfur compliance and reporting, volumes are expressed in gallons. Accordingly, credits and allotments are required to be calculated and reported in units of…
- Last published:
-
What test requirements exist for determination of the sulfur content of denatured ethanol? What test method must be used to determine the sulfur content of ethanol? In the absence of an approved test method, what guidance can the Agency provide fuel ethan
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The regulations do not require an ethanol blender, producer or supplier to test ethanol for sulfur content. The regulations do prohibit blending denatured ethanol into gasoline if the sulfur content of the denatured ethanol exceeds 30 ppm. See…
- Last published: