Search Frequent Questions
Filter By:
- Southeast Minnesota Groundwater Total results: 11
- Air Emissions Inventories Total results: 34
- Asbestos Total results: 141
- Butte Area/Silver Bow Creek Total results: 17
- Coronavirus (COVID-19) Total results: 33
- East Palestine, Ohio Train Derailment Total results: 148
- Emergency Planning and Community Right-to-Know Total results: 301
-
Fuel Program
Total results: 693
- Gasoline Sulfur Program Total results: 17
- Diesel Sulfur Program Total results: 7
- E15 comments Total results: 1
- Fuels and Fuel Additives (FFARs) Total results: 2
- Other Total results: 6
- Reformulated Gasoline and Anti-Dumping Total results: 431
- Registration Total results: 9
- Registration and Reporting under 40 CFR 79 Total results: 19
- Renewable Fuel Standard (RFS1) Total results: 67
- Renewable Fuel Standard (RFS2) Total results: 111
- Reporting Total results: 22
- Great Lakes Funding Total results: 92
-
Lead
Total results: 398
- Applying for Certification or Accreditation Total results: 22
- EPA/HUD Real Estate Notification & Disclosure Rule Total results: 24
- General Information About Lead Total results: 9
- Lead-Based Paint Program Fees Total results: 9
- Lead Abatement, Risk Assessment and Inspection Total results: 49
- Lead at Superfund Sites Total results: 3
- Lead in Drinking Water Total results: 25
- Lead in Products Total results: 1
-
Lead Renovation, Repair and Painting
Total results: 237
- Information for Do-It-Yourselfers Total results: 1
- Authorized State and Tribal Programs Total results: 3
- Enforcement and Inspections Total results: 5
- Firm Certification Total results: 26
- General Information about the Lead Renovation, Repair, and Painting (RRP) Rule Total results: 18
- Lead-Safe Certified Firm Logo Total results: 8
- Pre-Renovation Education Total results: 26
- Recordkeeping and Reporting Requirements Total results: 6
- Renovations Covered by the RRP Rule Total results: 84
- Renovator Certification and Training Total results: 12
- Training Provider Accreditation Total results: 7
- Work Practice Standards Total results: 41
- Testing for Lead Total results: 19
- MOVES Total results: 57
- Norwood Landfill Site Total results: 30
- Oil Regulations Total results: 96
- Permitting Under the Clean Air Act Total results: 19
- Radiation Total results: 1
- Risk Management Program (RMP) Total results: 285
Active filters:
Remove all filtersDisplaying 1 - 15 of 29 results
-
What is the Tier 2 Vehicle & Gasoline Sulfur Program?
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The Tier 2 Vehicle and Gasoline Sulfur Program is a landmark program, begun in January 2004, that affects every new passenger vehicle and every gallon of gasoline sold in the U.S. By designing cleaner cars that run on…
- Last published:
-
Will boiling my water help?
No. Boiling water will NOT reduce nitrate levels. In fact, it will make the level of nitrate worse because some of the water will evaporate but the nitrate will not. This increases the concentration of nitrate in water.
- Last published:
-
Can a refiner or importer use gasoline sulfur test methods other than ASTM D 2622-98, especially for sulfur levels of 10 ppm and less?
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The rule designates ASTM D 2622 as the benchmark test method by which compliance will be determined, and that is the test that the Agency typically will use in establishing compliance. However, the rule does permit alternative test…
- Last published:
-
There is significant difference between "refiner" and "refinery". Portions of the regulations use "refiner" where "refinery" is the appropriate term. While it may be clear from the context that "refinery" is meant, text should be changed to avoid any poss
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . We agree with the comment and intend to make these clarifications in a future rulemaking. These clarifications would not affect the regulatory requirements in the current final rule.
- Last published:
-
Is it safe to shower or bathe in water if it is over the nitrate MCL of 10 mg/L?
Nitrate is only a concern for ingestion (eating and drinking). It is not absorbed through your skin. People who install filter systems for nitrate often install them just for their kitchen sink faucet, and they use that faucet for their cooking and drinking water.
- Last published:
-
What is EPA doing?
EPA is working with its governmental partners and other stakeholders to investigate and address the issue. Most recently, EPA issued a letter to the state of Minnesota requesting a plan of action to address nitrate contamination in drinking water.
- Last published:
-
What should I do if my water has elevated nitrates and/or exceeds the MCL?
If nitrate exceeds the MCL of 10 mg/L, you should find a safe alternative drinking water supply. The quickest thing to do is to begin using bottled water for drinking. Another option is to install a treatment that will remove nitrate from your water such as reverse osmosis or a…
- Last published:
-
Why is nitrate contamination a concern?
Nitrate is an acute contaminant, meaning that health effects can occur immediately (I.e. within hours or days) of short-term exposure. Too much nitrate in your body makes it harder for red blood cells to carry oxygen. While most people recover quickly, this can be very dangerous for infants and some…
- Last published:
-
Must a refinery that produces both California gasoline and federal RFG designate each batch produced as either federal RFG or California gasoline, and maintain segregation of both products, even though the gasoline meets the requirements of both programs?
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . Section 80.375(c) requires that each batch of California gasoline be designated as such by the refiner or importer, and that California gasoline be segregated from gasoline that is not California gasoline at all points in the distribution system…
- Last published:
-
Truckers may obtain both premium gasoline and regular gasoline from a terminal in order to supply a retail outlet with midgrade gasoline. In such cases, if a truck obtains a load of gasoline from a terminal that consists of a mixture of gasoline from a te
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The regulation specifically exempts gasoline in trucks from the testing requirement for S-RGAS, and instead allows truckers to rely on the test result of the terminal supplying the truck carrier. See § 80.210(d)(4). Where a tanker truck receives…
- Last published:
-
Section 80.46(a) was amended by the rule to require the use of ASTM D-3246 to determine the sulfur content of butane. Many refiners and butane suppliers do not currently use that method. Requiring a new method prior to the 2004 effective date of the gasol
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The final gasoline sulfur rulemaking amended 40 CFR § 80.46(a) to require the use of ASTM D 3246-96 to determine the sulfur content of butane. We did not intend to require the use of this new test method…
- Last published:
-
Can butane blenders generate allotments and credits?
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . Section 80.340(b)(1) provides that butane blenders may comply with the gasoline sulfur rule sampling and testing requirements using test results from the butane supplier provided that certain requirements are met. One requirement is that the sulfur content of…
- Last published:
-
Does the gasoline sulfur rule require refiners and downstream parties to account for the sulfur content of a registered fuel additive, such as a corrosion inhibitor used to help prevent sulfur-related fuel gauge sending unit failures?
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . Currently, there is no requirement under the gasoline sulfur rule for refiners or downstream parties to demonstrate compliance with the gasoline sulfur standards for registered fuel additives. Parties who add fuel additives, however, are responsible for ensuring that…
- Last published:
-
Section 80.335(a)(2) requires refiners to retain sample portions for the most recent 20 samples collected, or for each sample collected during the most recent 21 day period, whichever is greater. Is a refinery that produces only one or two batches of gaso
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The cited section of the regulation specifies the minimum number of batch samples from a refinery, which once created, must be maintained (twenty). The regulation does not specifically address the maximum amount of time that any particular sample…
- Last published:
-
A refiner produces a batch of gasoline at its refinery. It collects a sample of the gasoline and conducts certification testing. The sulfur content test result is less than the 80 ppm refinery level standard. The gasoline is then moved to another tank wit
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The downstream standard applies to samples of gasoline subsequent to movement of the gasoline from the tank in which certification sampling is conducted, even when these subsequent samples are collected within the refinery or import facility where the…
- Last published: