EPA RCRA ID: PAD046771374
On this page:
- Cleanup Status
- Facility Description
- Contaminants at this Facility
- Institutional/Engineer Controls
- Enforcement and Compliance
- Related Information
- Contacts for this Facility
Cleanup Status
Note: The EPA is the lead agency for managing cleanups at this facility.
Pennsylvania Department of Environmental Protection (PADEP) visited the St. Marys Metal Finishing Inc. facility and met with company representatives on October 21, 2008. On May 15, 2019, that contamination in groundwater and human exposures risk from contaminants were under control
On August 28, 2019, the EPA determined corrective action performance standards have been attained at the entire facility.
Cleanup Actions or environmental indicators characterizing the entire facility are shown below. It is not intended as an extensive list of milestones/activities. This listing, and all the data on this page, come from EPA’s RCRAInfo and are refreshed nightly to this page. For this table and the Cleanup Activities Pertaining to a Portion of the Facility table that follows, a blank in the Status column could mean the action either has not occurred or has not been reported in RCRAInfo.
Cleanup Activities Pertaining to the Entire Facility
| Action | Status | Date of Action |
|---|---|---|
| Human Exposure Under Control Human Exposure Under Control(CA725) | ||
| Groundwater Migration Under ControlGroundwater Migration Under Control (CA750) | ||
| Remedy DecisionRemedy Decision (CA400) | ||
| Remedy ConstructionRemedy Construction (CA550) | ||
| Ready for Anticipated Use Ready for Anticipated Use (CA800) | ||
| Performance Standards AttainedPerformance Standards Attained (CA900) | ||
| Corrective Action Process TerminatedCorrective Action Process Terminated (CA999) |
For definitions of the terms used, hover over or click on the term.
Cleanup Activities Pertaining to a Portion of the Facility
| Action | Area Name | Date of Action |
|---|
For definitions of the terms used, hover over or click on the term.
Facility Description
Link to a larger, interactive view of the map.
The facility is a metals finishing company located at 1057 Trout Run Road in St. Marys, Benzinger Township, Elk County, Pennsylvania. The facility is located on a 1.37 acre parcel. The facility has been in operation at its present location since 1971. St. Marys Metal Finishing (SMMF) is an active metal treatment facility that applies functional plating on small parts for industrial and automotive applications. SMMF conducts three kinds of plating operations: plastic impregnation to prepare parts made from powdered metal for further plating; electronic zinc plating to rust proof and improve the part’s appearance; and electroless zinc phosphate plating to give the parts a grainy coating, so it can hold oil or paint. Hazardous wastes generated at the facility include cadmium waste (D006), chromium waste (D007), spent halogenated solvent (F002), sludge from electroplating operations (F006), spent cyanide plating bath solution (F007), and cyanide plating bath residue (F008).
Contaminants at this Facility
Trichlorethylene (TCE) in groundwater is a primary concern.
Institutional and Engineering Controls at this Facility
Institutional controls were not required at the facility.
Institutional and Engineering Controls help ensure human exposure and groundwater migration are under control at a cleanup facility. Where control types have been reported by states and EPA in EPA’s RCRAInfo, they are shown below. Not all control types are needed at all facilities, and some facilities do not require any controls. Where there are blanks, the control types may not be needed, may not be in place, or may not be reported in RCRAInfo.
Are Controls in Place at this Facility?
|
Control(s) Type |
Control(s) in Place? |
Areas Subject to Control(s) |
Documents available on-line: |
|
|---|---|---|---|---|
|
Institutional ControlsNon-engineering controls used to restrict land use or land access in order to protect people and the environment from exposure to hazardous substances remaining in the site/or facility. (CA 772) |
Informational DevicesInformational Devices (ID) |
|||
|
Governmental Controls (GC) |
||||
|
Enforcement and Permit Tools (EP) |
||||
| Proprietary ControlsProprietary Controls (PR) | ||||
|
Engineering ControlsEngineering measures designed to minimize the potential for human exposure to contamination by either limiting direct contact with contaminated areas or controlling migration of contaminants. (CA 770) |
Groundwater ControlGroundwater Control (GW) |
|||
|
Non-Groundwater |
||||
For definitions of the terms used, hover over or click on the term.
Enforcement and Compliance at this Facility
EPA’s Office of Enforcement and Compliance Assurance (OECA) provides detailed historical information about enforcement and compliance activities at each RCRA Corrective Action Site in their Enforcement and Compliance Historical Online (ECHO) system.
RCRA Enforcement and Compliance Reports from ECHO
Related Information
For more information about this facility, see these other EPA links:
- RCRA information in EPA’s Envirofacts database
- Information about this facility submitted to EPA under different environmental programs as reported in EPA’s Facility Registry Services
- Alternative Names for this facility as reported by EPA programs in EPA’s Facility Registry Services
- Cleanups in My Community provides an interactive map to see EPA cleanups in context with additional data, and lists for downloading data
- Search RCRA Corrective Action Sites provides a search feature for Corrective Action Sites
Documents, Photos and Graphics
Contacts for this Facility
EPA Region implements and enforces the RCRA Corrective Action program for and federally recognized tribes.
For further information on this corrective action site, use the Contact Information for Corrective Action Hazardous Waste Clean Ups listings that are accessible through Corrective Action Programs around the Nation.